在高壓工況的 “戰場” 上,閥門就像守護管道系統的 “守門大將”,稍有不慎便可能引發 “潰堤” 危機。從石油化工的高溫高壓管道,到水電工程的巨型輸水系統,不同場景對閥門的要求千差萬別。想要挑中靠譜的 “守門大將”,材料、結構、密封性能等要素缺一不可,這場嚴謹?shù)?“選角” 過程,藏著不少門道。
On the battlefield of high-pressure conditions, valves are like the "gatekeepers" guarding pipeline systems, and even a slight mistake can trigger a "dam breach" crisis. The requirements for valves vary greatly in different scenarios, from high-temperature and high-pressure pipelines in petrochemicals to giant water delivery systems in hydropower projects. To select a reliable 'gatekeeper', materials, structure, sealing performance and other elements are indispensable. This rigorous' casting 'process hides many tricks.
首先要 “摸透” 高壓工況的脾氣。不同行業的高壓環境各有特點:化工領域不僅壓力高,介質還可能具有腐蝕性、易燃易爆;電力系統中,高溫蒸汽帶來的熱沖擊不容小覷;而天然氣輸送管道,低溫與高壓并存。因此,了解具體工況的壓力數值、介質類型、溫度范圍,是選型的第一步。比如,在 10MPa 以上的超高壓環境中,普通閥門難以承受壓力,必須選擇高強度材質;若介質是強腐蝕性酸液,即便壓力不高,也需重點關注閥門的耐腐蝕性能。只有精準把握工況特性,才能縮小篩選范圍。
Firstly, it is necessary to "understand" the temperament of high-pressure working conditions. The high-pressure environment in different industries has its own characteristics: the chemical industry not only has high pressure, but the medium may also be corrosive, flammable, and explosive; The thermal shock caused by high-temperature steam in the power system should not be underestimated; And natural gas transmission pipelines coexist with low temperature and high pressure. Therefore, understanding the pressure values, medium types, and temperature ranges of specific operating conditions is the first step in selection. For example, in ultra-high pressure environments above 10MPa, ordinary valves are difficult to withstand pressure and must be made of high-strength materials; If the medium is a highly corrosive acid, even if the pressure is not high, it is important to pay close attention to the corrosion resistance of the valve. Only by accurately grasping the characteristics of the working conditions can the screening range be narrowed down.
材料是決定閥門 “抗壓實力” 的關鍵。在高壓下,閥門材料不僅要扛住巨大壓力,還得保證結構穩定不泄漏。鑄鋼和鍛鋼是常見的 “主力軍”,鑄鋼成本較低,適合制造大口徑閥門;鍛鋼經過鍛造處理,內部組織致密,強度和韌性更優,常用于高壓、高溫或高腐蝕性工況。對于更高要求的場景,不銹鋼、合金鋼甚至鈦合金等材料登場。例如,含鉬不銹鋼能抵御多種酸堿腐蝕,鈦合金則在海水、強氧化性介質中表現出色。除了金屬材料,密封部位常采用聚四氟乙烯、橡膠等非金屬材質,它們?nèi)彳浨颐芊庑阅芎茫⒁獠煌馁|(zhì)的耐溫、耐壓極限,比如普通橡膠在高溫高壓下易老化變形,需改用氟橡膠等高性能材料。
The material is the key to determining the "compressive strength" of the valve. Under high pressure, valve materials not only need to withstand tremendous pressure, but also ensure structural stability without leakage. Cast steel and forged steel are common "main forces". Cast steel has a lower cost and is suitable for manufacturing large-diameter valves; Forged steel undergoes forging treatment, resulting in a dense internal structure and superior strength and toughness. It is commonly used in high-pressure, high-temperature, or highly corrosive working conditions. For higher demand scenarios, materials such as stainless steel, alloy steel, and even titanium alloy are introduced. For example, molybdenum containing stainless steel can resist various acid and alkali corrosion, while titanium alloy performs well in seawater and strongly oxidizing media. In addition to metal materials, non-metallic materials such as polytetrafluoroethylene and rubber are often used for sealing parts, which are soft and have good sealing performance. However, attention should be paid to the temperature and pressure resistance limits of different materials. For example, ordinary rubber is prone to aging and deformation under high temperature and pressure, and high-performance materials such as fluororubber need to be used instead.

閥門的結構設計,直接影響其 “守門” 的可靠性。截止閥、閘閥、球閥、蝶閥等不同類型,各有優劣。截止閥通過閥瓣與閥座的貼合實現密封,關閉嚴密,適合截?cái)嗔黧w,但阻力較大,不適用于頻繁開關;閘閥全開時流體阻力小,適合大口徑管道,但密封性能相對較弱,高壓下可能出現輕微泄漏;球閥和蝶閥操作簡便,可快速啟閉,球閥密封性能好,常用于需要快速切斷的場合,蝶閥則更適合低壓大流量系統。在高壓工況下,通常優先選擇結構緊湊、密封可靠的類型,如固定球球閥,其球體被兩端軸承固定,壓力越高,密封面貼合越緊,能有效防止泄漏。
The structural design of valves directly affects the reliability of their "gatekeeping" function. Globe valves, gate valves, ball valves, butterfly valves and other different types have their own advantages and disadvantages. Globe valves achieve sealing by fitting the valve disc and seat tightly, suitable for cutting off fluids, but with high resistance and not suitable for frequent opening and closing; When the gate valve is fully opened, the fluid resistance is low, making it suitable for large-diameter pipelines. However, the sealing performance is relatively weak, and slight leaks may occur under high pressure; Ball valves and butterfly valves are easy to operate and can be quickly opened and closed. Ball valves have good sealing performance and are commonly used in situations where quick shut-off is required. Butterfly valves are more suitable for low-pressure and high flow systems. Under high-pressure conditions, it is usually preferred to choose compact and reliable sealed types, such as fixed ball valves, whose spheres are fixed by bearings at both ends. The higher the pressure, the tighter the sealing surface fits, which can effectively prevent leakage.
密封性能堪稱閥門的 “生命線”,高壓下任何微小縫隙都可能釀成大禍。閥門的密封分為內密封(防止介質泄漏)和外密封(防止介質外泄到大氣中)。內密封依靠閥瓣與閥座的配合,常見的密封面形式有平面、錐面和球面。平面密封加工簡單,但高壓下易受雜質影響導致密封失效;錐面密封比壓大,密封效果好,適用于高壓;球面密封則能自動對中,密封性能更穩定。外密封一般采用填料函結構,通過壓緊填料實現密封,填料的材質和裝填方式至關重要。例如,柔性石墨填料耐高溫、耐高壓,是高壓閥門常用的選擇,但裝填時需確保均勻緊實,否則容易出現外漏。
The sealing performance can be regarded as the "lifeline" of valves, and any small gap under high pressure can cause a major disaster. The sealing of valves is divided into internal sealing (to prevent medium leakage) and external sealing (to prevent medium leakage into the atmosphere). Internal sealing relies on the cooperation between the valve disc and the valve seat, and common sealing surface forms include flat, conical, and spherical. Flat sealing processing is simple, but it is easily affected by impurities under high pressure, leading to sealing failure; Cone sealing has a higher pressure ratio and better sealing effect, suitable for high pressure; Spherical sealing can automatically align and provide more stable sealing performance. The external seal generally adopts a stuffing box structure, which achieves sealing by compressing the packing. The material and filling method of the packing are crucial. For example, flexible graphite packing is resistant to high temperature and high pressure, and is a commonly used choice for high-pressure valves. However, it is necessary to ensure uniform and compact filling, otherwise it is prone to leakage.
操作方式的選擇也與工況緊密相關。手動閥門適用于壓力較低、操作頻率不高的場合,但在高壓下,手動操作可能十分費力;電動、氣動或液動閥門則通過驅動裝置實現遠程控制和自動化操作,省力且響應迅速。在高壓危險環境中,優先選擇電動或氣動閥門,不僅操作安全,還能與控制系統聯動,實現緊急情況下的快速關閉。不過,驅動裝置的可靠性同樣重要,需根據工況選擇合適的防護等級,避免因潮濕、粉塵等因素導致故障。
The choice of operation mode is also closely related to the working conditions. Manual valves are suitable for situations with low pressure and low operating frequency, but manual operation may be very laborious under high pressure; Electric, pneumatic, or hydraulic valves are remotely controlled and automated through driving devices, saving effort and responding quickly. In high-pressure hazardous environments, electric or pneumatic valves are preferred for safe operation and can be linked with control systems to achieve rapid closure in emergency situations. However, the reliability of the driving device is equally important, and the appropriate protection level should be selected according to the working conditions to avoid faults caused by factors such as humidity and dust.
在高壓工況的 “閥門選角” 中,沒有萬能的 “主角”,只有適配的 “最佳演員”。從材料強度到結構設計,從密封性能到操作方式,每個環節都需精準匹配工況需求。只有這樣,才能挑中靠譜的 “守門大將”,讓閥門在高壓環境中穩如泰山,守護整個管道系統的安全與穩定。
In the "valve selection" under high-pressure conditions, there is no universal "protagonist", only the "best actor" who is suitable. From material strength to structural design, from sealing performance to operation mode, every link needs to be accurately matched with the working condition requirements. Only in this way can we select the reliable "gatekeeper", make the valve as stable as Mount Tai in the high-pressure environment, and protect the safety and stability of the entire pipeline system.
本文由 良工閥門 友情奉獻.更多有關的知識請點擊 http://yantaidengju.com 真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
This article is a friendly contribution from Lianggong Valve For more related knowledge, please click http://yantaidengju.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.